Pinhole Camera – Find OUT All About It



If you are impressed by and amazed at the greatness, and at the same time, the sheer simplicity of the pinhole camera, this is the right place for you to be! If you want to learn about the pinhole camera, you couldn’t have gotten luckier!


The following article will help you know more about the all the basics of the pinhole camera – the construction, operation, history, benefits and so on.

To start with, the pinhole camera history dates back to the 4th century BC, when the Greeks apparently wrote books on it. It was not until the year 1856 that the name “pin-hole” was coined by Sir David Brewster.

It was also referred to as camera obscura. In the following centuries, in the period of Leonardo da Vinci, it was used for astronomical purposes, such as to study the solar eclipse and so on. However, it was only in the 19th and 20th centuries that it became a popular device for photography. It is also used in scientific studies. To know more about the pinhole camera history you can refer the article on Pinhole camera – History and beyond.


To put in simple words, you can make a camera with a wooden box or empty oatmeal can!

Paint the can all black to make it light tight. Use an aluminum foil or a heavy black paper and make a small hole in it – perhaps using an eight or ten point needle. The diameter of the hole is important as it determines how sharp or soft the image would be. Make a slightly bigger hole on the can and fasten this foil on paper on it.

Place the light sensitive film opposite the hole – emulsion side facing the hole. While doing this, ensure that you are in the dark so that you can avoid exposing the film to the light.

Place a flap of black tape over the hole as the shutter. For a more detailed procedure on how to make a pinhole camera that works, click here!

When you use it, use a subject from which more light would be reflected and keep the camera very still as long as the shutter has to remain open for the desired exposure time. You have to try and ensure that the camera does not shake. Close the shutter tight after it is over. And as for printing the image, the normal procedure can be followed.

The main advantage of it is that it is very simple to construct and use. You do not even have to spend heavily on it. Using an emptied oatmeal can is more like recycling it, so you are only making the best use of your money spent! There are now also digital pinhole cameras that are used as part of the surveillance/security system. Hence these are the many things to know about the camera.

To learn about the pinhole camera model and its detailed benefits, click here!

If you are impressed by and amazed at the greatness, and at the same time, the sheer simplicity of it this is the right place for you to be! If you want to learn about it, you couldn’t have gotten luckier! The following article will help you know more about the all the basics of the pinhole camera – the construction, operation, history, benefits and so on.

To start with, the pinhole camera history dates back to the 4th century BC, when the Greeks apparently wrote books on it. It was not until the year 1856 that the name “pin-hole” was coined by Sir David Brewster.

It was also referred to as camera obsura. In the following centuries, in the period of Leonardo da Vinci, it was used for astronomical purposes, such as to study the solar eclipse and so on. However, it was only in the 19th and 20th centuries that it became a popular device for photography. It is also used in scientific studies. To know more about the pinhole camera history, you can refer the article on Pinhole camera – History and beyond.

The construction and usage of the pinhole camera is simpler than you can ever imagine! To put in simple words, you can make a camera with a wooden box or empty oatmeal can! Paint the can all black to make it light tight. Use an aluminum foil or a heavy black paper and make a small hole in it – perhaps using an eight or ten point needle. The diameter of the hole is important as it determines how sharp or soft the image would be. Make a slightly bigger hole on the can and fasten this foil on paper on it.

Place the light sensitive film opposite the hole – emulsion side facing the hole. While doing this, ensure that you are in the dark so that you can avoid exposing the film to the light. Place a flap of black tape over the hole as the shutter. For a more detailed procedure on how to make pinhole camera that works, click here! When you use the camera, use a subject from which more light would be reflected and keep the camera very still as long as the shutter has to remain open for the desired exposure time. You have to try and ensure that the camera does not shake. Close the shutter tight after it is over. And as for printing the image, the normal procedure can be followed.

The main advantage of the pin-hole camera is that it is very simple to construct and use. You do not even have to spend heavily on it. Using an emptied oatmeal can is more like recycling it, so you are only making the best use of your money spent! There are now also digital pinhole cameras that are used as part of the surveillance/security system. Hence these are the many things to know about the camera. To learn about the pinhole camera model and its detailed benefits, click here!